Product Overview
The ES-COB-576-8MM-RGB is Senfey’s dotless RGB COB strip for interior ambient and colour-change work — restaurants, bars, retail vignettes and hotel accent coves. Three colour chips sit under a single phosphor line, so it mixes to one clean saturated colour instead of showing the discrete red, green and blue points you see through a diffuser on SMD 5050 RGB. At 576 LEDs per metre the emission reads as a continuous glow inside a shallow reveal or millwork slot. It shares the 8 mm footprint of Senfey’s COB LED strip family, so a fit-out can standardize on one profile across its white and colour-change zones.
Best For — Which Projects This Fits
- Restaurant, bar and lounge schemes that change character through the evening rather than holding one setting.
- Retail coves, vitrines and shelving reveals where colour follows a brand campaign, not a re-lamp.
- Hotel guestroom mood lighting and lobby coves pairing an architectural white layer with an RGB accent scene.
- Profiles with a milky diffuser at ≥ 12 mm distance, where a dotted source would throw three separate colour shadows before the mix completes.
- Systems on a standard 4-pin RGB decoder, DMX or WiFi controller — this is a common-anode analog RGB strip, not addressable.
Not For — When to Ask Us for a Different SKU
This is a dry-indoor analog RGB COB. Do not specify it for outdoor facades or wet zones — the IP20 build has no jacket or potting, so ask us for a sealed RGB variant. More importantly, it cannot do per-pixel effects, chasing colour or running-water animation: every LED receives the same signal, so if the design shows movement along the strip you need an addressable COB LED strip, and specifying this SKU will strand the whole control package. If the brief is purely white-light architectural, a single-colour build is easier to dim and cheaper to control. And where the scheme needs colour plus a proper white layer, ask us for an RGBW or RGBCW COB, which adds a dedicated white channel rather than mixing white from three colours — our RGB COB LED strip guide covers those variants.
Customization & Inquiry
Colour consistency is the thing to pin down on an RGB order: we hold output batch-to-batch so two coves driven from the same decoder resolve to the same colour, and we pre-solder 4-pin headers so nobody is wiring polarity by eye inside a finished bulkhead. Runs are cut to your setting-out drawing. To quote, send us: (1) total metres and the longest continuous run, (2) voltage choice and the driver or decoder model, (3) control protocol — DMX512, DALI DT8, 0–10V RGB, WiFi or Bluetooth, and (4) profile / diffuser model or a section drawing. Send Us Your Project Brief.
